CAP 3.0T Reinforced Silicone Intake | 2025+ Audi B10 S5

Please note, this is a pre-order item. The ETA for this Intake is approximately December 15, 2026. All pre-order sales are final and cannot be canceled.

Next-Generation Intake Performance for Your B10 S5 3.0T Turbocharged V6.

A new generation of S5 deserves an intake built to match. The CAP Reinforced Silicone Intake for the B10 Audi S5 is engineered to move more air, improve response, and bring out the character of Audi’s turbocharged 3.0T V6.

Developed through advanced CFD analysis and real-world testing, this intake combines generous airflow capacity with precise B10 fitment and an unmistakable induction sound.

An oversized 8-inch air filter works alongside a high-flow velocity stack to guide air smoothly into the intake tube and reduce turbulence at the entry point. The result is sharper throttle response, quicker boost onset, and stronger power delivery throughout the RPM range, with no engine tune required.

What Makes the CAP B10 S5 Intake Stand Out

• Oversized 8-Inch Performance Air Filter
  With 53% more surface area than leading competitor options, the large filter accommodates demanding airflow requirements without compromising filtration efficiency.

• CAPFlowMax Proprietary Filtration Technology
  Developed specifically for this intake, CAPFlowMax combines high airflow with superior filtration. Clean air reaches the turbocharger with minimal restriction, supporting consistent performance and dependable engine protection.

• Largest High-Flow Velocity Stack for the B10 Platform
  A carefully contoured velocity stack guides air from the oversized filter into the intake tube. Its shape helps smooth airflow entry, reduce turbulence, and minimize restrictions across stock and upgraded setups.

• Reinforced Silicone Intake Tube
  Durable and heat resistant, the reinforced silicone tube combines flexibility with a clean, understated appearance that complements the B10’s engine bay.

Developed Around the B10 Platform

• CFD Optimized and Flow Tested: Advanced airflow simulations and physical testing help refine the intake’s design and airflow characteristics.

• 3D Scanned Engine Bay Modeling: Detailed engine bay measurements allow the intake to make effective use of available space while achieving precise B10 S5 fitment.

• Refined Through Multiple Revisions: Successive design updates optimize airflow, sound, clearance, and ease of installation.

• Durable Reinforced Construction: The silicone intake tube is built to handle engine bay heat and demanding driving conditions.

• Factory Mounting Integration: Original rubber grommets work with CAP hardware to provide secure mounting and filter isolation.

• Sealed Heat Shield Design: Weather stripping and an integrated bracket system help shield the filter from engine bay heat while keeping the assembly firmly in place.

Let Your B10 S5 Be Heard

Bring the sound of your turbocharged V6 to the forefront. The CAP Reinforced Silicone Intake delivers pronounced turbo spool and an aggressive induction note under acceleration, creating a more engaging sound that makes it feel like your B10 S5 can finally breathe.

Enjoy a sportier driving experience while retaining the everyday drivability you expect from your S5.

Ready for the Next Stage of Your Build

From a stock daily driver to a tuned setup, the CAP Reinforced Silicone Intake is designed to accommodate airflow demands beyond factory levels.

Its oversized filter, high-flow velocity stack, and reinforced silicone tube provide a strong foundation as your B10 S5 build develops. For future turbo upgrades, compatibility will depend on retaining the required inlet dimensions.

Turbo Inlet Compatibility

This intake is designed for OEM sized turbo inlets only. It is not compatible with aftermarket inlets that differ from factory dimensions.

CAP Lifetime Warranty

The CAP B10 S5 Reinforced Silicone Intake includes our CAP Lifetime Warranty, protecting your investment for as long as you own it.

Warranty Disclaimer: The air filter is a wear and tear item and is not covered under the lifetime warranty.

The Best Intake in the World for Your B10 S5 3.0T Turbocharged V6. Bar None.

The CAP Reinforced Silicone Intake for the B10 Audi S5 is engineered with one goal: move more air, more efficiently, than anything else on the market. Designed from the ground up using advanced CFD analysis and real-world testing, this intake system delivers measurable performance gains while setting a new benchmark for airflow capacity, sound, and fitment.

Featuring an oversized 8-inch air filter and an integrated bellmouth inlet, the CAP Reinforced Silicone Intake supports high airflow demands while promoting smooth air delivery to the turbocharger. The result is improved throttle response, faster boost onset, and stronger power throughout the RPM range, all with OEM-level reliability and no need for a tune.

What Sets Our Intake Apart

• Massive 8-Inch Performance Air Filter
  Featuring 53% more surface area than leading competitor options, the oversized filter supports extreme airflow demands without sacrificing filtration efficiency.
• CAPFlowMax Proprietary Filtration Technology
  Developed exclusively for this intake, CAPFlowMax balances maximum airflow with superior filtration, allowing clean air to reach the turbocharger with minimal restriction for consistent performance and long-term reliability.
• Integrated Bellmouth Inlet
  An aerodynamically contoured inlet engineered to promote smoother airflow entry and minimize potential restrictions. Integrated directly into CAP’s high-flow filter assembly for efficient airflow delivery.
• Reinforced Silicone Construction
  Durable and heat resistant, the reinforced silicone intake tube combines flexibility with a clean, understated engine bay appearance.

Engineering & Development

• CFD Optimized and Flow Tested: Designed using advanced airflow simulations to deliver proven performance gains backed by real engineering.
• 3D Scanned Engine Bay Modeling: Available space is carefully utilized to maximize airflow and ensure precise B10 S5 fitment.
• Multiple Design Revisions: Refined through numerous iterations to perfect airflow, sound, and installation.
• Built for Durability: Reinforced silicone construction designed for long-term use under demanding driving conditions.
• OEM Mounting Integration: Reuses factory rubber grommets with CAP hardware for factory-like fit, filter isolation, and reliability.
• Sealed Heat Shield Design: Weather stripping and an integrated bracket system keep the heat shield securely in place while helping isolate the filter from engine bay heat.

Sound That Demands Attention

The CAP Reinforced Silicone Intake doesn’t just perform—it transforms the driving experience. Expect aggressive turbo spool, sharp throttle response, and a more engaging sound that makes it feel like your B10 S5 can finally breathe.

Under load, the pronounced induction note brings out the character of your turbocharged V6 without sacrificing daily drivability.

Designed to Scale With Your Build

Whether your S5 is stock, tuned, or being prepared for a future turbo upgrade, the CAP Reinforced Silicone Intake is engineered to support airflow demands well beyond factory levels.

Its oversized filter, integrated bellmouth inlet, and reinforced silicone construction provide a strong performance foundation for your B10 S5.

Turbo Inlet Fitment

This intake is designed to fit OEM sized turbo inlets only and is not compatible with aftermarket inlets that differ from factory dimensions.

Lifetime Warranty

The CAP B10 S5 Reinforced Silicone Intake is backed by our CAP Lifetime Warranty, protecting your investment for as long as you own it.

Warranty Disclaimer: The air filter is considered a wear and tear item and is not covered under the lifetime warranty.